The WM3500 is a proven industrial thin-kerf sawmill for primary log breakdown, and for cutting logs which cannot be processed in an automated line. The WM3500 delivers higher log yield at lower investment and operating cost than alternatives, increasing profitability and ability to produce diverse products quickly.
The WM3500 requires only one operator to manage log handling, sawing, and remove finished boards for further processing. Powerful computer setworks, centralised controls, and heavy-duty hydraulic functions enable the operator to focus on producing quality timber at a high production rate.
The WM3500’s wide throat capacity cuts large diameter logs into boards or cants with help from the bidirectional chain turner, hydraulic toeboards, and heavy-duty log clamp.
The WM3500 uses thin-kerf, narrow band blades that maximise log yield and minimise waste and operational costs – increasing profits and competitiveness.
The WM3500 WM3500 adalah sawmil industri kayu tipis yang telah terbukti untuk memotong kayu gelondongan utama, dan untuk memotong kayu gelondongan yang tidak dapat diproses secara otomatis. WM3500 memberikan hasil kayu gelondongan yang lebih tinggi dengan investasi dan biaya operasi yang lebih rendah daripada alternatif, meningkatkan profitabilitas dan kemampuan untuk menghasilkan produk yang beragam dengan cepat.
WM3500 hanya membutuhkan satu operator untuk mengelola penanganan kayu, menggergaji, dan melepas papan jadi untuk diproses lebih lanjut. Setwork komputer yang handal, kontrol terpusat, dan fungsi hidraulik heavy duty memungkinkan operator untuk fokus pada produksi kayu berkualitas pada tingkat produksi yang tinggi
| Power | |
|---|---|
| Power | 22 kW Listrik |
| Kapasitas potong | |
| diameter kayu maksimum | 100 cm |
| lebar kayu maksimum potong | 86 cm |
| lebar kayu maksimum | 78.5 cm |
| kedalaman potong maksimum | 33 cm |
| Max. Clamp Width | 66 cm |
| Min. Clamp Width | 5 cm |
| Head Features dan opsi | |
| Setworks | Computer Setworks |
| Head Naik/Turun | Elektrik |
| Head Maju mundur | Elektrik |
| Blade Guide Arm | Elektrik |
| Lubrikasi Gergaji | Automatic |
| Sistem Blade Tension | Pneumatic |
| Debarker | opsional |
| Diameter Port Sawdust Collection | 150mm |
| Opsi Tambahan | Penglihatan dengan laserRoller, Double Block Blade GuidePantographBoard Return Arms |
| Gergaji | |
| Panjang | 5000 mm |
| Lebar | 38 mm |
| Roda gergaji | |
| Diameter Roda Gergaji | 635 mm |
| Tipe Roda Gergaji | Belted |
| Material Roda Gergaji | Cast Iron |
| Bed Features dan opsi | |
| Konstruksi Bed | Monorail |
| Angled Bed Rails | N/A |
| Bed Extensions | N/A |
| Trailer Package | N/A |
| Feature bed | Operator Station |
| handling log | |
| Manual | N/A |
| STANDARD Hydraulic | 2 Single Vertical SupportsCentral ClampBi-directional Chain TurnerLog Leveling RollerPower Roller2 Hold-Down ClampsHydraulic Pump 5.5 kW |
| SUPER Hydraulic | Central ClampLog Leveling RollerPower Roller3 Double Vertical Supports2 Chain Turners2 Hold-down ClampsHydraulic Pump 7.5 kW |
| Sawmill features dan opsi | |
| Konstruksi Frame | Cantilever |
| Power Requirements | 3 Phases, 400 V, 50 Hz |
| kebutuhan angin | 110 PSI |
| standar keamanan | CE |
| Tambahan | Incline ConveyorTransfer DeckLog Deck 3.6 mLog Deck 6 mHeavy-Duty Bed With Short ConveyorAir-Conditioned Operator Cab |
