The SlabMizer MB200 Slab Flattener efficiently surfaces and flattens wood slabs, boards, burls, cookies, and other wide material with minimal labor. Compared to a traditional router or planer, the SlabMizer flattens wider and thicker material up to 1.4m wide and 203mm thick in less time using powered cutter head directional controls with variable feed speed. For larger capacity, 1.5m table extensions can be added to extend the material length and a 1.8m width option is coming soon.
Operation
Material is secured on the heavy duty, welded steel frame by 4 adjustable clamps. To adjust the cutting depth, a hand crank located on the top of the cutter head is adjusted from 0.4mm to 3mm in 0.4mm increments. The cutter head is engaged and operated by a powered control console that can be used from any side of the machine or detached from the stand for handheld use. Powered controls include on/off, variable feed speed, and a joystick direction control for the X, Y, and Z axis for finishing material with or against the grain. The cutter head can also be operated manually with a handle. Once both sides of the slab are surfaced, fine finishing is accomplished by using the 178mm orbital sanding head attachment for the desired finish. Dust from the operation is easily removed with a 90mm diameter extraction port on top of the cutter head that can be connected to a dust extraction system.
The SlabMizer MB200 Slab Flattener secara efisien permukaan dan meratakan lempengan kayu, papan, burl, cookies, dan bahan lebar lainnya dengan tenaga kerja minimal. Dibandingkan dengan router atau planer tradisional, SlabMizer meratakan material yang lebih lebar dan lebih tebal hingga lebar 1,4m dan tebal 203mm dalam waktu yang lebih singkat menggunakan kontrol arah kepala pemotong bertenaga dengan kecepatan umpan variabel. Untuk kapasitas yang lebih besar, ekstensi meja 1,5m dapat ditambahkan untuk memperpanjang panjang material dan opsi lebar 1,8m akan segera hadir.
| Pilihan Power | |
|---|---|
| Pilihan Power | 3HP Electric 1-Phase 220V, 30A |
| Kapasitas material | |
| maksimum tebal material | 200mm |
| minimum panjang material | 56cm |
| maksimum panjang material | 13' or lebih panjang dengan tambahan 5' Extensions |
| minimum kedalaman potong | 0.4mm |
| kedalaman potong maksimum | 3mm |
| dimensi mesin dan persyaratan | |
| Cutter Head | 5" dengan lima buah pisau Carbide 4 sisi (15mm x 15mm x 2.5mm - R150) |
| Sanding Head | 178mm Orbital dengan Hook/Loop Paper |
| Kecepatan cutter head | 5,500rpm |
| Feed Motor | Motor, 1/6HP 90RPM 230V 3PH 19:1 Gear |
| Diameter Port Sawdust Collection | 90mm |
| Tambahan | Tambahan 1.5m meja Modular Extensions |
