With the MP200 Planer/Moulder, you can plane and mould on one or two sides at once to produce mouldings or flooring. The MP200 includes 1 horizontal top cutter, and 1 vertical side cutter. Both can be fitted with planing knives or moulding profile knives.
You begin by planing or moulding one or two adjoining sides in one pass. The power feed rollers move the board under the horizontal cutter and past the vertical side cutter. If you are just planing, then you can simply flip the board over, adjust the table height, and then plane the final two sides.
If you are moulding a profile, then you simply need to change out the knives, adjust the table height and then mould the final two sides.
With the MP200, you can plane and mould timber in only two passes.
| Horizontal cutter | |
|---|---|
| Diameter | 72 mm |
| Vertical spindle | |
| Motor | 3 kW (4 HP), 3-phase |
| diameter spindle | 30 mm |
| diameter tool | 140 mm |
| Thicknessing | |
| Tinggi maksimum | 220 mm |
| Lebar maksimum | 410 mm |
| Panjang meja | 830 mm |
| Kedalaman potong maksimum | 6 mm |
| Moulding | |
| Tinggi maksimum | 100 mm |
| Lebar maksimum | 310 mm |
| Kedalaman potong maksimum | 10 mm |
| Feed System | |
| Feed Motor | 0.18 kW (0.25 HP), 3-phase0.37 kW (0.5 HP), 3-phase (with planetary gearbox) |
| Feed Speed | 5 m/min2-12 m/min (dengan planetary gearbox) |
| diameter feed roller | 32 mm |
