The HR115 horizontal resaw comes standard with more features and power for higher productivity up to 20 metres per minute.
Quickly process cants up to 400 mm wide into standard sized timber with the HR115. Maximum cutting height is 280 mm. Head height is adjusted electrically, and optional setworks are available. The variable belt speed is adjustable depending on the material being cut – up to 20 metres per minute.
Two standard hold-down rollers keep cants steady during cutting. In-feed and out-feed roller tables, as well as a side roller table facilitate material handling, as well as returning uncut cants for another pass. To produce tapered products such as house siding, the head easily adjusts from 0° - 8°.
Mesin HR115 horizontal resaw hadir standar dengan lebih banyak fitur dan daya untuk produktivitas lebih tinggi hingga 20 meter per menit.
Memproses balok kayu dengan cepat hingga lebar 400 mm menjadi kayu berukuran standar dengan HR115. Tinggi pemotongan maksimum adalah 280 mm. Ketinggian kepala disesuaikan secara elektrik, dan pengaturan opsional tersedia. Kecepatan belt secara variabel dapat disesuaikan tergantung pada bahan yang dipotong – hingga 20 meter per menit.
| Pilihan Power | |
|---|---|
| Pilihan Power | 7.5kW (10HP) Listrik11kW (15HP) Listrik |
| Kapasitas potong | |
| maksimum panjang balok kayu | Unlimited |
| Gergaji | |
| Panjang Gergaji | 4.26m |
| Diameter Roda Gergaji | 710mm |
| Tipe Roda Gergaji | Steel, dynamically balanced |
| Ketebalan gergaji | 0.89mm (0.035")1.07 mm (0.042") |
| Lebar Gergaji | 32mm35mm |
| head feature & opsi | |
| Setworks | Setworks dengan position controls digital |
| konfigurasi head | Horizontal |
| konfigurasi kontrol | Control Panel pada Machine |
| feed system & operasi | |
| Feed Speed | 0-27m/min (0-88.5 ft/min) |
| Hold-down (penekan) Material | Pneumatic Hold-Down Rollers (Roller penekan pneumatic) & Idle Top Roller (roller penekan atas) |
